Jasmin Beharic

Beharic, Jasmin, and Cindy Harnett. 2025. “Thermally Switchable Tethers for Rapid Release of Strained Microstructures.” J. Microbio Robot. 21 (1): 3. https://doi.org/10.1007/s12213-025-00183-6.

Islam, Mohammad Shafquatul, Sushmita Challa, Danming Wei, Jasmin Beharic, Dan O Popa, and Cindy K Harnett. 2024. “Investigating Flow Induced Mechanics of Strain-Engineered Microcantilevers Integrated in a Flow-through System.” Microsyst. Technol., September, 1–14. https://doi.org/10.1007/s00542-024-05754-4.

Beharic, Jasmin, and Cindy Harnett. 2024. “High Speed Release Dynamics of Microfabricated Hooks for Fiber and Wire Grasping.” In Proceedings of 2024 IEEE MARSS Conference, 1–5. https://doi.org/10.1109/MARSS61851.2024.10612726.

Islam, Mohammad S, Sushmita Challa, M H Yacin, Sruthi S Vankayala, Nathan Song, Danming Wei, Jasmin Beharic, and Cindy K Harnett. 2023. “Thermally Driven MEMS Fiber-Grippers.” Journal of Micro and Bio Robotics, August. https://doi.org/10.1007/s12213-023-00161-w.

Wei, Danming, Sushmita Challa, Mohammad S Islam, Jasmin Beharic, Cindy K Harnett, and Dan O Popa. 2022. “Multi-Robot Collaboration for Electronic Textile Fabrication.” In 2022 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), 1–6. IEEE. https://paperpile.com/shared/9tCJeL.

Islam, MS, S Challa, MH Yassin, SS Vankayala, J Beharic, and CK Harnett. 2022. “MEMS Bimorph Fiber-Gripping Actuators.” In 2022 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), 1–6. IEEE. https://paperpile.com/shared/4QJ6cO.

Beharic, J, KT James, RS Keynton, MG O’Toole, and CK Harnett. 2021. “Impact of Microfabrication Processing Temperatures on the Resonant Wavelength of Gold Nanoplates.” Materials Letters 284:128967. https://doi.org/10.1016/j.matlet.2020.128967.

Challa, Sushmita, M Shafquatul Islam, Danming Wei, Jasmin Beharic, Dan O Popa, and CK Harnett. 2021. “Functional Fiber Junctions for Circuit Routing in E-Textiles: Deterministic Alignment of MEMS Layout With Fabric Structure.” In International Manufacturing Science and Engineering Conference, 85079:V002T08A009. American Society of Mechanical Engineers. https://doi.org/10.1115/MSEC2021-63887.

Islam, Shafquatul. 2019. “Integrating Bioinspired Strain-Engineered MEMS Actuators with Breathable Fabric Carriers.” Presented at the 1st International Conference on Nature-Inspired Surface Engineering (NISE), Stevens Institute of Technology, Hoboken, New Jersey, June 11.

Challa, Sushmita, Canisha Ternival, Shafquatul Islam, Jasmin Beharic, and Cindy K Harnett. 2019. “Transferring Microelectromechanical Devices to Breathable Fabric Carriers with Strain-Engineered Grippers.” MRS Advances, February, 1–8. https://doi.org/10.1557/adv.2019.6.

“Transferring Microelectromechanical Devices to Breathable Fabric Carriers with Strain-Engineered Grippers.” 2018. Poster presented at the Fall Materials Research Society Meeting, Boston, MA, November 25. https://issuu.com/harnettlab/docs/mrsposterckh_ppt.

“Experimental Study of AC-Driven Flow through Nanopores with Single-Side Conductive Coatings.” 2018. Poster presented at the 71st Annual Meeting of the American Physical Society Division of Fluid Dynamics, Atlanta, GA, November 18. https://issuu.com/harnettlab/docs/dfdharnett.

Beharic, J., T. M. Lucas, and C. K. Harnett. 2014. “Analysis of a Compressed Bistable Buckled Beam on a Flexible Support.” Journal of Applied Mechanics, April. https://doi.org/10.1115/1.4027463.

Lucas, Thomas M., Kurtis T. James, Jasmin Beharic, Evgeniya V. Moiseeva, Robert S. Keynton, Martin G. O’Toole, and Cindy K. Harnett. 2014. “Wavelength Specific Excitation of Gold Nanoparticle Thin-Films.” Applied Physics Letters 104 (1): 011909. https://doi.org/10.1063/1.4861603.

Harnett, Cindy K, Jasmin Beharic, Canisha Ternival, Sushmita Challa, and Mohammad Shafquatul Islam. n.d. Microgrippers for Transferring Devices to Fibrous Surfaces. App 16/983,405.